Telstar TLA018580MD Manual De Instrucciones página 35

AUTOMATIC WASHING MACHINE
TLA018580MD
2. After end of operation and the buzzer sounding 6 times, it will power off automatically.
Unbalance Control:
1. During the spin process, and under the condition of safety switch connected, if the sudden break hap-
pened, the washing machine will come into the unbalance adjustment situation;
2. While coming into the unbalance adjustment process, the rinsing LED flashed, inlet the water to reach to
the set level, adjust the clothes' status, drain after finished rinsing, and return to the normal spinning process. If
it is not effective after 3 times' adjustment, there will be an alarm.
Power failure memory function
If the power supply becomes off suddenly during operation , the machine remembers the current operation
state . When power is on ,the machine returns to former operation state automatically.
One Touch System
After power on, push "start/pause"button directly to One-key Washing. The function will be canceled if other
buttons, such as water level, program, temperature and function are pressed before. It will also be invalid if
there is water left in the inner tube, and the program will be directly set into Normal with default water level 6.
Washing Machine will perform fuzzy detection immediately by pushing "start/pause" after power on and wa-
ter level and program will be selected according to amount of clothing. During the selecting, water level lamp
is flashing continuously, as digital display shows "--", at the same time, only power button is effective.
After detecting is completed, program is chosen to "Quick" with automatically setting water level 1/2/3,and
"Normal"with water level 4/5/6,also, "Soak" with water level 7/8. Program will run automatically when checked
out and finished program and water level setting.
35