Making Ice; Stopping Your Product - Beko RDSE450K20W Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• Stop your refrigerator by means of the
temperature setting button or unplug
the power cord from the outlet. You
can place a container filled with hot
water into the freezer compartment
or leave the door of the freezer
compartment open in order to hasten
the defrosting.
• Remove the water that accumulates
in the lower container of the freezer
compartment with an absorbent cloth
or sponge.
• Dry the freezer compartment
completely and return the
temperature setting button to its
previous position.
• Operate your refrigerator for 2 hours
while it is empty and its doors are
closed before replacing your food into
the deep freezer.

Making ice

*optional
Fill the ice container with water and
place it into the freezer compartment.
Your ice will be ready approximately in
two hours.
You can remove the ice in the ice
container by removing it from the
freezer and twisting it.

Stopping your product

If your thermostat is equipped with "0"
position:
- Your product will stop operating
when you turn the thermostat button
to "0" (zero) position. Your product
will not start unless to you turn the
thermostat button to position "1" or
one of the other positions again.
If your thermostat is equipped with
"min" position:
- Unplug your product to stop it.
16
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido