Schlage MTB11 Instrucciones Para La Instalación página 2

4
Route cable through holes.
L Baseplate must always be used when mounting the unit.
5
Install baseplate with top screw.
In case of alternative mounting screws, only a #6 diameter Pan Head
Screw should be used.
6
Plug cable into reader.
7
Install reader.
In case of alternative mounting screws, only a #6 diameter Pan Head
Screw should be used.
8
Snap cover into place and install cover screw.
Tamper Resistant
6-32 x Z\v"
Pin-in-Torx
button
head, Use if
desired.
Regular
6-32 x Z\v"
Do not
over-tighten!