Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
08
ADJUSTMENTS. Before cutting be sure
depth and bevel adjustments are tight.
09
SUPPORT AND SECURE THE WORK
PROPERLY. Insure that the material to
be cut is clamped (PIC 3) and solidly
supported and balanced on a strong,
stable and level work surface. Support
the work so that the wide portion of the
saw shoe is on the portion of the
material that doesn't fall after the cut is
made. Never hold cut off piece by hand
(PIC 4 ). KICKBACK from blade pinch
can result. Keep both hands on saw at
all times.
10
STAY ALERT AND EXERCISE CONTROL.
Keep body positioned to one side of
blade. Always maintain a firm grip and
control of saw with both hands.
Do not change hand grip or body
position while saw is running. Take
precaution to avoid injury from cut off
pieces and other falling material during
operation.
PIC 1
PIC 3
PIC 2
PIC 4
35
Publicidad
Tabla de contenido
