Care And Maintenance - Ty Pennington STYLE 146.46371610 Guía De Uso Y Cuidado

(b) Provided with a listed overfilling prevention device; and
(c) Provided with a cylinder connection device compatible with the
connection for the appliance.
1. Disconnect the cylinder when the appliance is not in use.
2. Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
3. Store the cylinder outdoors in a well-ventilated area (not in a building,
garage, or other enclosed area) out of the reach of children.
4. The cylinder used must include a collar to protect the cylinder valve.
5. Do not store a spare LP-gas cylinder under or near this appliance;
6. Never fill the cylinder beyond 80 percent full;
7. Place the dust cap on the cylinder valve that is provided with the cylinder
valve. Other types of caps or plugs may result in leakage of propane.
Hose assembly
Place the propane hose with regulator assembly out of pathways where
people may trip over it or in area where the hose will not be subjected to
accidental damage.
Replace the assembly prior to the appliance being put into operation if
there is evidence of excessive abrasion or wear, or if the hose is damaged.
The pressure regulator and hose assembly supplied with the appliance must
be used .The replacement hose assembly/ regulator shall be that specified
by the manufacturer.

CARE AND MAINTENANCE

To obtain the best performance from your heater make sure you perform the
following
maintenance activities on a regular basis:
a. Abrasive cleaners will damage this product.
b. Never use oven cleaner to clean any part of heater.
c. Do not clean any heater part in a self-cleaning oven. The extreme heat
will damage the finish.
d. More frequent cleaning may be required as necessary. It is imperative
that control compartment, burners and circulating air passageways of the
heater be kept clean.
e. Spiders and insects can create a dangerous condition that may damage
heater or make it unsafe. Keep burner area clean of all spiders, webs or
insects. Clean burner holes by using a heavy-duty pipe cleaner. Compressed
air may help clear away smaller particles.
f. Inspect heater before each use.
g. Have heater inspected annually and repairs should be made by a
qualified service person.
h. Check heater immediately if any of the following conditions exist.
22