Optional Accessories (Not Included) To Use Glomex Antennas; Necessary Tools For Assembly (Not Provided) - Glomex PANDORA V8000 Manual Del Usuario E Instalación

3.1 OPTIONAL ACCESSORIES (NOT INCLUDED) TO USE GLOMEX ANTENNAS

To be able to use your new GLOMEX satellite
antenna for boats, you will have to procure or buy
also:
- a TV set;
Optional accessory
Satellite decoder i-CAN 1110SV TIVÙSAT 230 VAC
- 12 VDC
XDome terrestrial digital - satellite HD combi
decoder (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
SD card with new satellite
SD card with software update
Stainless steel support 0°- 5°
Twin radome
Radome painting - RAL colour chosen by the
customer
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage hole
for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimensions
for control unit installation) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- Reciprocating saw (to create the compartment
in case of wall built-in installation of the control
unit; use the template provided on page 52) (6).
- LOCTITE ® 638 (7).
www.glomex.it
PANDORA V8000 - URANIA 2 V9330
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
GLOMEX code
V9193
V9192
4.120.0077
4.120.0078
V9500
V8000 TWIN/V9330 TWIN
SATPAINT
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various
components, the distance between them, the
length of the various cables and the accessibility to
the equipment once it is installed.
S
WARNING
Always lift the antenna from the lower radome and
never from the upper radome or any part inside it.
Fig. 2
43
Upper radome
Lower radome