CAMP CHEF FTG900-2 Folleto De Instrucción página 5

FTG900-2 PARTS
GRIDDLE (1)
FTG900-6
VALVE (6)
SHELF LEFT (1)
FTG600-6
FTG600-3
BEZEL (6)
FTG600-27
BURNER (6) FTG600-8
GRIDDLE GREASE CUP (1)
FTG600-10
M6 NUT (6)
M6 FLAT WASHER (12)
M6 X 12 BOLT (32)
LEG LEFT (1)
FTG900-1
REAR LEG BRACKET (1)
FTG900-2
SWIIVEL CASTER (2)
PG36-7
8
MANIFOLD (1)
FTG900-5
SHELF RIGHT (1)
FTG600-4
IGNITER (6)
FTG600-9
PG BOTTLE OPENER
KNOB (6)
CCH3-2
SHELF BRACKET (4)
CCH-6
REGULATOR (1)
TANK BRACKET (1)
FTG600-23
AXLE BOLT (2)
FTG600-20
UPPER SHELF (1)
FTG900-3
CART WHEEL CAP (2)
CCH-27
LOWER SHELF (1)
FTG900-4
0418-FTG900-PARTS
Warning: Read and follow all instructions and warnings before assembling or operating the grill.
The following tools are required to assemble this grill.
Phillips Screwdriver
Adjustable end wrench
1. Remove all contents from packaging.
2. Remove any loose parts from the inside of the grill.
3. Turn the grill upside down.
4. Assemble the legs to the bottom of the grill as shown using the hardware indicated in Figure 1. Tighten all hardware. (Note:
Make sure to install the leg with the tank hook on the same side as the regulator hose)
HRL
LEG RIGHT (1)
FTG600-28
CART WHEEL (2)
CCH-25
FIG 1
LEG RIGHT (1)
FTG600-28
LEG LEFT (1)
FTG900-1
M6 X 16 BOLT (10)
M6 WASHER (12)
M6 NUT (6)
9