How To Use - Tanda elos me Guia Del Usuario

How to use

1. After choosing the right elo - s level for
you, press the elo - s activation button
on applicator.
2. With the thumb and forefinger of your
hand, lightly touch the two metal
grip sensors, one on each side of
the applicator.
3. Apply the tip of the applicator on
your skin so that both RF delivery
bars are in complete contact with
the skin.
4. Once full contact is achieved, you will
notice light flashes, indicating that the
system is operating. The elo - s activation
button will automatically turn itself off
if no pulses have been emitted for a while.
5. Move the applicator slowly and
continuously without stopping in one
place so that the light flashes follow
each other and cover the entire
area. DO NOT return to the same
spot for at least 10 seconds.
DO NOT hold the device in one spot.
Facial hair should only be removed
after reading the facial treatment
instructions in this User Guide
Visit us at www.tanda.com.
NB: It is essential to watch the
instructional video (can be watched at
www.tanda.com) before using the system
for the first time.
NB: It is recommended to use the system
in an area with good natural light or in a
well - lit environment.
NB: When using the device on difficult
to treat areas (eg. underarm) treat the
area in 2 directions: left/right and up/
down motions, for full coverage. Hard-to-
reach areas can also be treated by first
using either the shaver or epilator, using
the protective cap instead of the elo - s
cartridge, followed by the application
of elo - s (while placing the protective cap
on the shaver/epilator side). Shaver and
epilator attachments sold separately.
NB: The first time you use the system with
the epilator cartridge, it may feel slightly
uncomfortable, as you are removing hairs
from the roots of the follicles. This feeling
usually subsides after several treatments,
even if you have sensitive skin.
NB: We recommend NOT TO LOOK
at the light flashes.
17 EN