Conceptronic CLLSPK21 Guía De Instalación Rápida página 11

ENGLISH
H. Connect the speaker system to an audio source:
a. Plug the MINI-JACK of the signal input cable into the output port of a audio
source (Computer, walkman, MP3 Player, DVD Player, etc.)
b. Plug the other end of the cable into the input port (printed as R-INPUT) at the
back of the subwoofer, white coloured RCA jack into the white input and the
red coloured RCA jack into the red input.
I. Plug the power cable to an AC outlet.
J. Switch on the audio source to which the speaker is connected.
K. Make sure that all the knobs (Volume) are at the minimum settings.
L. Put the power switch on at the back of the subwoofer and switch on the speaker
system by rotating the power knob on the right speaker. The LED at the front will
light up.
M. Adjust the volume knob on the speaker. You can alter the bass knob at the back of
the subwoofer to adjust the sound effect.
11