HyLoft TireLoft 01011 Instrucciones De Montaje página 4

2. Pre-Drill Remaining Mounting Holes
3. Attach Remaining Lag Screws
Page 4
2:
Make sure that Side Frames (A)
are perfectly vertical using a level
and pre-drill into the wall studs
through the remaining 6 mounting
plate holes using a 3/16" drill bit.
3:
Insert the remaining Lag Screws (B)
into the pre-drilled holes using a
1/2" nut driver or socket wrench.
Do not fully tighten at this time.