Hama Slim-Traveller Manual De Instrucciones página 28

So-called pixel errors can occur depending on the manufacturing
process. These manifest themselves as white or black pixels
that permanently light up during display. Within the context
of production tolerances, a max. 0.01% of these pixel errors
measured on the total size of the screen are permitted as a
tolerance and do not represent a product fault.
Observe the following safety instructions to ensure safe handling
of the device:
• Visually inspect the device before using it to make sure that
there is no external damage. Do not operate the device if it is
damaged.
• Only have the device repaired by specialists. Improper repair
work invalidates any warranty claims.
• Faulty components may be replaced with original spare parts
only. Only original spare parts can guarantee that applicable
safety requirements are adhered to.
• Disconnect the power supply adapter before cleaning the
device, during thunderstorms, and in the event of malfunctions.
• Keep the device away from moisture and protect it from being
penetrated by liquids or objects.
• Disconnect the power supply adapter immediately if the device
comes into contact with liquids.
• Do not place any objects on top of the device.
• Place the device on a fl at, level surface.
• Do not place the device in a hot, wet, or very humid environment.
• The device requires adequate air circulation in order to
function properly. During operation, do not place the device on
soft surfaces, carpets, or other materials that might block air
circulation.
• The socket must be easily accessible so that it is easy to
disconnect the power supply adapter in case of an emergency.
27