Checking Power Battery; Hold Function; Low Battery Warning - Gram Precision CSX Serie Manual De Utilización

Condition
• The scale must not be in HOLD mode. Otherwise, error message
flashing.
• The scale must be stable. Otherwise, error message
• Current weight reading must be greater than 0 or 0.0 or 0.00 (depending on the
resolution). Otherwise error message
• Current weight reading must be lower than 100% scale´s maximum capacity,
otherwise, error message
• The crane must be in gross mode. Otherwise, this action will be recognized as Tare
out.
Notice:
Tareing will reduce the apparent overloading range of the scale. For example, if a 1000kg
container is tared and the scale maximum capacity is 5000kg, the scale will overload at a
new weight of 4.009kg (5000 – 1000 + 9 additional divisions)

* CHECKING POWER BATTERY

1 Press the
2 Press the OFF key on the remote control, before turning off, the display will show
power battery
3 Press the MR and F1 keys on the remote control, the display will show the power
U
battery "   ". To return to normal weighing mode, press the MR on the remote
control.

* HOLD FUNCTION

Press the HOLD key on the remote control to hold the weight displayed on the screen. The
indicator
To release the current weight displayed on the screen, press again the HOLD key on the
remote control. The indicator
Condition
To active the HOLD function, the scale must be stable. Otherwise, message error
will flash.

* LOW BATTERY WARNING

If voltage battery is less than U 580, the display will be unstable.
The display will show the message " - L b – ", the scale will turn off automatically.
Recharge the battery using the supplied AC/Adaptor.
key on the scale. The display will show the power battery "
"U    "
will light on.
will flash.
will flash.
will light off.
will keep
will flash.
U   "
7