Cables, Extensions And Plugs; Instruction On Removing Sawdust Generated During Use; Prevention Measures For Users; Personal Safety Measures - Bona Belt Manual De Funcionamento

Commencing Operation (Cont.)

Cables, extensions and Plugs

Only use approved cables. The maximum
recommended cable length is 10m; for greater lengths
use cables with a larger cross-section.
MACHINE WITH 230 V~50 Hz MOTOR 2.2 kW
For machines with a 230 V~50 Hz motor, a HO5VV-F-3x2,.5
mm2 HAR-approved power supply cable must be used along
with an approved SCHUKO 2P+E 16 A 200÷-250 V plug.

Instruction on removing sawdust generated during use

For minimized dust environment use a vacuum cleaner intended
for wooden dust.
Preventing Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when
using the sanding machine. Always wear a dust mask of at
least class P2, when using the sanding equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used.
10 10
Using the machine with unsuitable and/or excessively long
cables may cause injury or damage to people or objects.
The machine must never be moved using its cable and the cable
must never be pulled when disconnecting from the socket.
Keep the cable away from sources of heat, oil and sharp edges.
Sawdust can ignite spontaneously and cause injury or damage.
It must be disposed of appropriately. Always empty the sawdust
into metal containers which are located outside the building.
Sawdust can ignite spontaneously and cause injury or damage.
Empty the contents of the dust bag when it is 1/3 full. Empty the
dust bag at the end of each machine use. Never leave the dust
bag unattended when it contains sawdust. Do not empty the
contents of the dust bag above a fire.
It is adviceble to wear safety goggles, protective clothing
during sanding operations.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use EN-ISO approved ear
protectors (earmuffs) during sanding operations.
Bona Belt Manual