Introduction; Safe And Correct Use; Machine Data Plate - Bona Belt Manual De Funcionamento

Introduction

Safe and correct use

This instruction manual should be read carefully before
using the Bona Belt wood flooring sander for the first
time.
The instruction manual contains important information
on safety and preventing improper use of the machine
and will resolve any doubts or questions, making
possible to operate the machine safely and with ease.
Removing safety features could cause death or physical
injury. Familiarize yourself with the machine before
using it for the first time.

Machine Data Plate

The following information can be found
on the machine data plate:
1) Name of the manufacturer
2) Machine model
3) Year of manufacturer (see 7)
4) Motor power
5) Supply voltage and frequency
6) Rated current
The Bona Belt wood flooring sander is suitable for the dry
sanding of wood floors. Any other use without the consent of
the manufacturer is prohibited. DO NOT use on wet floors.
See 'Machine Warnings' on page 12.
Keep hands and clothing away from moving mechanical parts.
The work area is protected via the base frame and the mobile
cover on the abrasive drum.
If a situation arises which has not been described in this
manual, contact your distributor or Bona Representative.
7) Serial number:
• The first two numbers refer to the year of
manufacture
(14 = 2014)
• The second group of three numbers indicates the
day of the year the machine was manufactured
(127 = May 7th)
• The last two numbers indicate the progressive
number of machines produced that day of
manufacture (13 = 13th machine produced that
day)
EN
Bona Belt Manual
7 7