V-Chip - TruTech CR270TT8 Manual Del Usuario

O
PTIONAL SETTING
[FORE COLOR]
Font color of the displayed caption can be switched as
below.
or
VOL VOL
[BACK OPACITY]
Background opacity of the displayed caption can be
switched as below.
or
VOL VOL
[BACK COLOR]
Background color of the displayed caption can be
switched as below.
or
VOL VOL
4
Press [MENU] to exit.
MENU
20
EN
[TRANSPARENT]
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[YELLOW]
[MAGENTA]
[CYAN]
[SOLID]
[TRANSLUCENT]
[FLASH]
[TRANSPARENT]
[WHITE]
[BLACK]
[RED]
[GREEN]
[BLUE]
[YELLOW]
[MAGENTA]
[CYAN]

V-chip

V-chip reads the ratings for programs, then denies access to the programs
which exceed the rating level you set. With this function, you can block
certain programming inappropriate for children.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K /L] to select "V-CHIP SET UP",
then press [VOL X].
CH
or
CH
VOL
3
Use [the Number buttons] to enter the 4-digit
numbers for your access cord.
1 2 3
4 5 6
7 8 9
– /ENT
0
+ 100
• When you have not set up your code, enter 0000.
• When the code is correct, the following "V-CHIP SET
UP" menu is displayed.
See the following description for setting each item.
Note:
• When you select a rating and set it to "BLOCK", the higher
ratings will be blocked automatically. The lower ratings will
be available for viewing.
• When you set the highest rating to "VIEW", all ratings turn
to "VIEW" automatically.
• If the "PROTECTED..." message appears during your TV
viewing, change to a channel that is not blocked. Then, you
can access "V-CHIP SET UP" menu and change the setting to
allow all TV viewing.
• To block any inappropriate programming, set your limits in
both "TV RATING" and "MPAA RATING".
• The V-chip setting will be retained after a power failure
(except the access code reverts to 0000).
e.g.) digital TV mode
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
ACCESS CODE
_ _ _ _
TV RATING A
B
MPAA RATING
C
CHANGE CODE