Other Functions Of Your - PRESIDIUM Gem Indicator PGI Manual Del Usuario

4. OTHER FUNCTIONS of your Presidium Gem Indicator
4.1 Settings Function
Test
> Settings
Calibrate
Library
Navigate downwards to the second option "Settings" and
select.
In the Settings function, you may adjust Sound and Color.
Settings – Sound
Press "Select" at the option "Sound" to either turn it on
or off. (Fig. 4.1)
By selecting "Sound On", beeps will sound as you
navigate up and down in the menus, and there will be
alerts when test result is completed or when metal is
detected.
By selecting "Sound Off", no beeps will be emitted from
the tester and you will not be alerted via sound when the
test is completed or when metal is detected.
21
Fig. 4.1
Settings – Color
Press "Select" at the option "Color" to either turn it on or
off. (Fig. 4.2)
By selecting "Color On", you will be switching on the
Color separation function. The tester will automatically
prompt you for your color input after a test is done, so you
may input the color, thereby narrowing down the possible
results.
By selecting "Color Off", the tester will not prompt you for
your color input after a test is done. It will then only give
you the possible results based on thermal conductivity.
Note: When Results are displayed, you may still input or
change color by navigating down and "Select" Color in
the Results menu where there will be 12 colors for you
to choose from.
To exit Settings menu, navigate downwards and "Select"
Exit.
4.2 Calibrate Function
Test
Settings
> Calibrate
Library
You may calibrate the tester to check on its accuracy
using the provided Calibration Disk and by selecting
Calibrate in the main menu.
For more instructions on Calibrate function, please refer
to Section 5 – Calibration.
Fig. 4.2
22