Descargar Imprimir esta página

REV B6 Manual Del Usuario página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Volume setting/Melody selection
Press the "Volume"/"melody forward/backward" button until you hear the required volume/melody.
You can change the volume at any time and this is independent of the corresponding transmitter. The
last selected volume is automatically saved.
You can still replay different bell tones by pressing "Melody forward/backward". This does not effect
the saved bell tone when coding between transmitter and receiver.
Installation
Choose a suitable location for the chime and bell push. Check the selected location for wiring before
drilling any holes.
Tip: Test the desired function before ultimately installing the device at the place of installation you
chose.
Chime (B6 (AC)): Insert the chime into a 230V~ power socket. The recommended installation height
is 1.1m.
Chime (B6 (DC)): Screw the screws into the wall until they are only protruding by a few millimeters.
Hang the chime on the intended suspension clips.
Bell push: Mount the mounting plate using the enclosed screws. Push the bell push onto the
mounting plate or use the enclosed double-sided tape for mounting.
Troubleshooting
Error
Error correction
description
The chime does not
Check the batteries of the receiver (chime) and the transmit-
ter (bell push, motion detector, window contact). Change the
sound
batteries if necessary.
Check whether the distance between the receiver (chime) and
transmitter (bell push, motion detector, window contact) is too
far. If necessary, reduce the distance, to get back within the
range.
Check whether the receiver (chime) is coded with the transmitter
(bell push, motion detector, window contact). If necessary, code
the receiver and transmitter as described above.
Check the volume setting of the receiver (chime). Increase the
volume if necessary.
Range is low
Check the mounting surface and the surroundings. Metal surfa-
ces can reduce the range. Avoid installation on or near metal.
Structural conditions (e.g. concrete walls or ceilings) can have
an effect on the range.
Other wireless products in the vicinity can have an effect on the
range. Change the location of the receiver (chime) and/or trans-
mitter (bell push, motion detector, window contact) or the other
wireless product.
Check the batteries of the receiver (chime) and transmitter (bell
push, motion detector, window contact). Change the batteries
if necessary.
11
Compatible Products
article number
type number
0082600103
DB500 + DB50
0082610103
DB500AC + DB50
0082620103
DB400 + DB50
0082630103
DB400AC + DB50
0083950103
DB50
0083960103
SA-IR07-NWX03-D
0083970103
SA-MC08-N04-D
0082650103
B6 (AC) + B6 (DC)
+ DB50
0082640103
B7 (DC)
+ SA-IR07-NWX03-D
+ DB50
WEEE Disposal Notice
According to the European regulations, used electrical and electronic equipment may no longer
be put out into unsorted rubbish. The symbol on the wheeled rubbish bin points out the necessity
for separated collection. Help us to protect the environment and ensure that this unit is put out in
the appropriate systems for separate collection once you do not use it any longer. DIRECTIVE OF
THE EUOROPEAN PARLIAMENT AND COUNCIL of 4th July 2012 concerning used electrical and
electronic equipment.
Battery disposal instructions
Batteries and rechargeable batteries must not be disposed of with household waste. Every
consumer is legally obliged to dispose of all batteries and rechargeable batteries, whether or
not they contain harmful substances, to a suitable commercial or municipal collection point
municipality/district so that they can be disposed of in an environmentally friendly manner.
Batteries and rechargeable batteries should only be returned in a discharged state!
CE Conformity Statement
REV Ritter GmbH hereby declares that it complies with radio equipment type B6 (AC) +
B6 (DC) + DB50 according to DIRECTIVE 2014/53/EU. The complete CE Declaration of
Conformity can be found under: www.rev.de under the corresponding article or type
number.
designation
Wireless chime Orchestra square white + bell push
Orchestra white
Wireless chime Orchestra square for socket white +
bell push Orchestra white
Wireless chime Orchestra rectangle white + bell
push Orchestra white
Wireless chime Orchestra rectangle for socket white
+ bell push Orchestra white
Wireless bell push Orchestra white
Wireless motion detector Orchestra white
Wireless window contact Orchestra white
Wireless chime set Orchestra Gong Q + Gong Q
socket white
+ bell push white
Wireless chime set Orchestra Gong Q +
wireless motion detector white
+ bell push white
12

Publicidad

loading

Productos relacionados para REV B6

Este manual también es adecuado para:

B6 acB6 dcDb50