Danze D5620 Serie Instrucciones De Instalación página 11

F. Reinstall the stem extension and slide cartridge into valve
socket : THE NOTCH OF STEM EXTENSION SHOULD BE
IN LINE WITH THE NOTCH OF CARTRIDGE STEM.
G. Reinstall washer and sleeve.
H. See temperature calibration section for setting max.
temperature.
I. Reinstall trim to valve.
Check Valve Replacement/Servicing
A. Turn off water supply to valve.
B. With a socket wrench of H7/8" (21mm) and at least 1
3/16" (30mm) in depth, remove the check valve from
valve body counterclockwise.
C. Replace with new check valve and reinstall it to valve
body by doing the step B in reverse, making sure the
check valve is fully opened in the valve body.
D.
Reinstall the trim to valve body.
Warranty + Support
Danze faucets are covered by a manufacturer's "limited lifetime" warranty for manufacturing defects.
Tech Support
Toll Free Service Line
US : 1-888-328-2383
Canada : 1-800-487-8372
Website : www.danze.com
10
© 2008 Danze, Inc. All rights reserved.
®