Campbell Hausfeld FP209800 Manual De Instrucciones Y Lista De Piezas
Campbell Hausfeld FP209800 Manual De Instrucciones Y Lista De Piezas

Campbell Hausfeld FP209800 Manual De Instrucciones Y Lista De Piezas

Compresores sin aceite

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 8 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of
home and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, COULD result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service. In case of
questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance.
© 2010 Campbell Hausfeld/Scott Fetzer
STOP!
Record the Model No., Serial No. and date
of purchase located on the base below the
pump in the space below.
Model No. _______________________
Date Code _______________________
Date of purchase _________________
Retain these numbers for future reference.
Have the date code, model number,
and parts list (with missing parts circled
before calling.)
shipping, handling or use. Damage may
result in bursting and cause injury or
property damage.
General Safety Information
CalIFOrnIa PrOPOSItIOn 65
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
General SaFety InFOrMatIOn
Since the air compressor and other
components used (filters, lubricators,
hoses, etc.), make up a high pressure
pumping system, the following safety
precautions must be observed at all
times:
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information
visit www.chpower.com
Oilless
Compressors
DO nOt retUrn the
PrODUCt tO the
retaIler! Call
1-800-543-6400
Do not operate unit
if damaged during
This product or
its power cord may
FP209800
Breathable Air Warning
This compressor/pump is not
equipped and should not be used "as
is" to supply breathing quality air.
For any application of air for human
consumption, the air compressor/
pump will need to be fitted with
suitable in-line safety and alarm
equipment. This additional equip-
ment is necessary to properly filter
and purify the air to meet minimal
specifications for Grade D breath-
ing as described in Compressed Gas
Association Commodity Specification
G 7.1 - 1966, OSHA 29 CFR 1910. 134,
and/or Canadian Standards Associa-
tions (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air ap-
plication and proper in-line safety
and alarm equipment is not simul-
taneously used, existing warranties
shall be voided, and Campbell Haus-
feld disclaims any liability whatso-
ever for any loss, personal injury or
damage.
1. Read all manuals included
with this product
carefully. Be thoroughly
familiar with the controls
and the proper use of the
equipment.
2. Follow all local electrical and
safety codes as well as in the US,
National Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
IN626701AV 3/10
MANUAL

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld FP209800

  • Página 1 (OSHA). times: REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. For parts, product & service information © 2010 Campbell Hausfeld/Scott Fetzer IN626701AV 3/10 visit www.chpower.com...
  • Página 2: Spraying Precautions

    Oilless Compressors General Safety Information Installation Never attempt (Continued) lOCatIOn to repair or modify a tank! 3. Only persons well acquainted with Welding, drilling or any other It is extremely important to use the these rules of safe operation should modification will weaken the compressor in a clean, well ventilated tank resulting in damage from rupture...
  • Página 3 FP209800 Installation (Continued) Pressure Handle 2. If repair or replacement of cord or Gauge ON/OFF Switch plug is necessary, do not connect Regulator grounding wire to either flat blade Knob terminal. The wire with insulation having an external surface that is green (with or without yellow stripes) is the grounding wire.
  • Página 4: Moisture In Compressed Air

    Oilless Compressors Operation (Continued) MOIStUre In COMPreSSeD aIr 6. Adjust regulator to proper pressure Moisture in compressed air will form into droplets as it comes from an for tool or tire. Operate tool per air compressor pump. When humidity is high or when a compressor is in instructions.
  • Página 5 FP209800 notes www.chpower.com...
  • Página 6: Troubleshooting Chart

    Oilless Compressors troubleshooting Chart Symptom Possible Cause(s) Corrective action Compressor will not run 1. Switch in OFF position 1. Make sure compressor is plugged in and switch is ON 2. No electrical power at wall outlet 2. Check circuit breaker or fuse at electrical panel. 3.
  • Página 7: Replacement Parts List

    FP209800 For Replacement Parts or Technical Assistance, Call 1-800-543-6400 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Address parts correspondence to: Campbell Hausfeld Attn: Customer Service 100 Production Drive Harrison, OH 45030 U.S.A.
  • Página 8 8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY: A. Provide dated proof of purchase and maintenance records. B. Call Campbell Hausfeld (800-543-6400) to obtain your warranty service options. Freight costs must be borne by the purchaser. C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  • Página 9: Proposition 65 De Californie

    (avec les parties manquantes encerclées) suivantes: avant d’appeler. MÉMENTO : Gardez votre preuve datée d’achat à fin de la garantie ! Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité. © 2010 Campbell Hausfeld/Scott Fetzer IN626701AV 3/10 9 Fr...
  • Página 10: Précautions De Pulvérisation

    Compresseur Sans Huile Généralités sur la Sécurité Installation Ne jamais essayer Suite enDrOIt de réparer ou de modifier 3. Seules les personnes bien un réservoir! Le soudage, Il est très important d’utiliser le familiarisées avec ces règles perçage ou autre compresseur dans un endroit propre d’utilisation doivent être autorisées modifications peuvent affaiblir le...
  • Página 11 FP209800 Installation ( Suite Interrupteur Poignée Manomètre 2. Si la réparation ou le remplacement ON/OFF du cordon ou de la fiche est Bouton de nécessaire, ne pas connecter le fil régulateur de terre à ni une ni l’autre borne plate. Le fil avec l’isolation qui a une surface externe verte (avec ou sans rayures) est le fil de terre.
  • Página 12: Soupape De Sûreté Asme

    Compresseur Sans Huile Fonctionnement ( Suite l’hUMIDIté DanS l’aIr COMPrIMé aVant ChaQUe DéMarraGe - L’humidité dans l’air comprimé forme des goutelettes en arrivant de la PrOCéDUre De FOnCtIOnneMent pompe du compresseur. Si l’humidité est élevée ou si le compresseur est utilisé 1.
  • Página 13 FP209800 entretien ( 4. Vidanger le réservoir de toute 5. Le tuyau doit être débranché du Suite condensation en ouvrant le robinet compresseur et suspendu avec les 3. En portant des lunettes de sécurité, de vidange au fond du réservoir.
  • Página 14: Guide De Dépannage

    Compresseur Sans Huile Guide de Dépannage Symptôme Cause(s) Possible(s) Mesures Correctives Le compresseur ne 1. Interrupteur en position “OFF” (arrêt). 1. S’assurer que le compresseur est branché et que fonctionne pas. l’interrupteur est à ON (marche) 2. Aucun courant à la prise de courant 2.
  • Página 15: Liste De Pièces De Rechange

    FP209800 Pour Pièces de Rechange ou Assistance Technique, appeler 1-800-543-6400 S’il vous plaît fournir l’information suivante : - Numéro du modèle - Numéro de série (si applicable) - Description de la pièce et son numéro sur la liste de pièces Correspondance concernant les pièces :...
  • Página 16: Garantie Limitée

    8. RESPONSABILITÉS DE L’ACHETEUR AUX TERMES DE CETTE GARANTIE : A. Fournir une preuve d’achat datée et un état d’entretien. B. Appelez Campbell Hausfeld (800-543-6400) pour obtenir vos options de service sous garantie. Les frais de transport sont la responsabilité de l’acheteur.
  • Página 17: Descripción

    RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro. © 2010 Campbell Hausfeld/Scott Fetzer IN626701AV 3/10 17 Sp...
  • Página 18: Precauciones Para Rociar

    Compresores Sin Aceite Informaciones Generales de Instalación Nunca debe desconectar Seguridad ( Continuación o tratar de ajustar las válvulas de COlOCaCIOn 2. Siga todos los códigos de seguridad seguridad. Igualmente, debe evitar Es de suma importancia usar el que se le acumule pintura u otros laboral y electricidad establecidos en materiales.
  • Página 19: Instalación ( Continuación )

    FP209800 Instalación ( Continuación Interruptor Mango Manómetro ON/OFF 2. Si necesita reparar o reemplazar el Perilla del cordón o el enchufe, no conecte el regulador cable de conexión a tierra a ninguno de los terminales planos. El alambre cuya superficie externa del aislante es verde, con o sin rayas amarillas, es el cable de conexión a tierra.
  • Página 20: Procedimiento De Encendido

    Compresores Sin Aceite Funcionamiento hUMeDaD en el aIre COMPrIMIDO Continuación La humedad que se acumula en el aire comprimido se convierte en gotas anteS De InICIar CaDa a medida que sale del cabezal del compresor de aire. Cuando el nivel de PrOCeDIMIentO De enCenDIDO humnedad es muy alto o cuando el compresor ha estado en uso continuo 1.
  • Página 21 FP209800 notas 21 Sp...
  • Página 22: Guía De Diagnóstico De Averías

    Compresores Sin Aceite Guía de diagnóstico de averías Problema Posible(s) Causa(s) acción a tomar El compresor no funciona 1. El interruptor está en la posición OFF 1. Asegúrese de que el compresor esté enchufado y que el (apagado) interruptor esté en la posición ON (encendido) 2.
  • Página 23: Lista De Repuestos

    FP209800 Para Ordenar Repuestos o Asistencia Técnica, Sirvase Llamar al Distribuidor Más Cercano a Su Domicilio Sírvase darnos la siguiente información: - Número del modelo - Número de Serie (de haberlo) - Descripción y número del repuesto según la lista de repuestos...
  • Página 24: Compresores Sin Aceite

    1. DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.

Tabla de contenido