Campbell Hausfeld FP2090 Serie Manual De Instrucciones

Campbell Hausfeld FP2090 Serie Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

See Warranty on page 6 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Oilless Compressors
Description
Oilless compressors are designed for
do-it-yourselfers with a variety of home
and automotive jobs. These units
operate without oil. Compressed air
from this unit will contain moisture.
Install a water filter or air dryer if
application requires dry air.
Safety Guidelines
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
an imminently hazardous situation which,
if not avoided, WILL result in death or
serious injury.
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
a potentially hazardous situation which,
if not avoided, MAY result in minor or
moderate injury.
important information, that if not
followed, MAY cause damage to
equipment.
CALIFORNIA PROPOSITION 65
This product or its power
cord contains chemicals
known to the State of
California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.
dust when you cut, sand, drill or grind
materials such as wood, paint, metal,
concrete, cement, or other masonry.
This dust often contains chemicals
known to cause cancer, birth defects,
or other reproductive harm. Wear
protective gear.
REMINDER: Keep your dated proof of purchase for warranty purposes!
© 2010
STOP!
Record the Model No., Serial No. and
date of purchase located on the base
Danger
indicates
below the pump in the space below.
Model No. ____________________
Date Code ____________________
Warning
indicates
Date of purchase _________________
Retain these numbers for future
reference.
Caution
indicates
Unpacking
Notice
After unpacking the unit, inspect
indicates
carefully for any damage that may
have occurred during transit. Make
sure to tighten fittings, bolts, etc.,
before putting unit into service. In case
of questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance.
Have the date code, model number,
and parts list (with missing parts circled
before calling.)
You can
unit if damaged during shipping, handling
create
or use. Damage may result in bursting and
cause injury or property damage.
Attach it to this manual or file it for safekeeping.
FP2090, FP2091, FP2094 Series
DO NOT RETURN THE
PRODUCT TO THE
RETAILER! CALL
1-800-543-6400
Do not
operate
Breathable Air Warning
This compressor/pump is not
equipped and should not be
used "as is" to supply breathing
quality air. For any application
of air for human consumption,
the air compressor/pump will
need to be fitted with suitable
in-line safety and alarm
equipment. This additional
equipment is necessary to
properly filter and purify the air
to meet minimal specifications
for Grade D breathing as
described in Compressed Gas
Association Commodity
Specification G 7.1 - 1966, OSHA
29 CFR 1910. 134, and/or
Canadian Standards
Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is
used for the purpose of
breathing air application and
proper in-line safety and alarm
equipment is not
simultaneously used, existing
warranties shall be voided, and
the Manufacturer disclaims any
liability whatsoever for any
loss, personal injury or damage.
IN617403AV 1/10

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Campbell Hausfeld FP2090 Serie

  • Página 1 See Warranty on page 6 for important information about commercial use of this product. Operating Instructions FP2090, FP2091, FP2094 Series Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
  • Página 2: General Safety Information

    Oilless Compressors General Safety 11. To reduce fire hazard, keep Do not engine/motor exterior free of oil, Information twist, bend knot, or abrade hose. solvent, or excessive grease. 20. Do not wrap hose around body. Since the air compressor and other Never components used (filters, lubricators, remove or...
  • Página 3: Before First Startup Break-In Procedure

    FP2090, FP2091, FP2094 Series Installation (Continued) ON/OFF Switch 2. If repair or replacement of cord or Handle plug is necessary, do not connect grounding wire to either flat blade terminal. The wire with insulation having an external surface that is Safety Valve green (with or without yellow stripes) is the grounding wire.
  • Página 4: Before Each Startup Operating Procedure

    Oilless Compressors Operation (Continued) MOISTURE IN COMPRESSED AIR Moisture in compressed air will form into droplets as it comes from an air 7. Unplug power cord. compressor pump. When humidity is high or when a compressor is in BEFORE EACH STARTUP continuous use for an extended period of time, this moisture will collect in the OPERATING PROCEDURE tank.
  • Página 5: Troubleshooting Chart

    FP2090, FP2091, FP2094 Series Troubleshooting Chart Symptom Possible Cause(s) Corrective Action Compressor will not run 1. Switch in OFF position 1. Make sure compressor is plugged in and switch is ON 2. No electrical power at wall outlet 2. Check circuit breaker or fuse at electrical panel. 3.
  • Página 6 8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY: A. Provide dated proof of purchase and maintenance records. B. Call Campbell Hausfeld (800-543-6400) to obtain your warranty service options. Freight costs must be borne by the purchaser. C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
  • Página 7: Directives De Sécurité

    Voir la Garantie à la page 12 pour de l’information importante sur l’utilisation commercial de ce produit. Instructions d’Utilisation Série FP2090, FP2091, FP2094 S’il vous plaît lire et conserver ces instructions. Lire attentivement avant de monter, installer, utiliser ou de procéder à l’entretien du produit décrit.
  • Página 8: Généralités Sur La Sécurité

    Compresseur Sans Huile Généralités sur 10. Si l’équipement vibre anormalement, 17. Ne pas diriger la peinture ou autre ARRÊTER le moteur et l’inspecter matériel pulvérisé vers le la Sécurité immédiatement. La vibration est compresseur. Situer le compresseur généralement une indication d’un aussi loin que possible de l’endroit de Puisque le compresseur d’air et les autres problème.
  • Página 9: Instructions De Mise À La Terre

    Série FP2090, FP2091, FP2094 Installation (Suite) Interrupteur ON/ OFF INSTRUCTIONS DE MISE À LA TERRE Manche 1. Ce produit est conçu pour l’utilisation d’un circuit de 120 volts et a une fiche de mise à la terre comme celle indiquée Soupape de sur la Fig.
  • Página 10 Compresseur Sans Huile Fonctionnement L’HUMIDITÉ DANS L’AIR COMPRIMÉ L’humidité dans l’air comprimé forme des goutelettes en arrivant de la pompe du (Suite) compresseur. Si l’humidité est élevée ou si le compresseur est utilisé continuellement, Réinitialisation du moteur - (non cette humidité s’accumulera dans le réservoir. En utilisant un pistolet à peinture ou illustré, se trouve à...
  • Página 11: Guide De Dépannage

    Série FP2090, FP2091, FP2094 Entretien de la prise et l’enrouler autour du condensation en ouvrant le robinet (Suite) manche pour éviter de l’endommager de vidange au fond du réservoir. pendant l’entreposage. La pression du réservoir doit être sous 69 kPa quand on vidange le réservoir. 3.
  • Página 12: Garantie Limitée

    2. GARANTIE ACCORDÉE PAR (GARANT) : Campbell Hausfeld/Scott Fetzer Company, 100 Production Drive, Harrison, Ohio, 45030, Téléphone : (800) 543-6400 3. BÉNÉFICIAIRE DE CETTE GARANTIE (ACHETEUR) : L’acheteur original (sauf en cas de revente) du produit Campbell Hausfeld. 4. PRODUITS COUVERTS PAR CETTE GARANTIE : Ce compresseur d’air Campbell Hausfeld.
  • Página 13: Compresores Sin Aceite

    Ver la Garantía en página 19 para información importante sobre el uso comercial de este producto. Manual de Instrucciones Serie FP2090, FP2091, FP2094 Sírvase leer y guardar estas instrucciones.Lea con cuidado antes de tratar de armar, instalar, manejar o darle servicio al producto descrito en este manual.
  • Página 14: Informaciones Generales De Seguridad

    Compresores Sin Aceite Informaciones 9. Mantenga los dedos alejados del 17.Nunca rocíe la pintura y otros compresor cuando esté funcionando; materiales, directamente hacia el Generales de las piezas en movimiento o calientes, le compresor. Coloque el compresor lo Seguridad ocasionarían heridas y/o quemaduras. más lejos posible del área de trabajo, para minimizar la acumulación de 10.
  • Página 15: Conexion A Tierra

    Serie FP2090, FP2091, FP2094 Instalación (Continuación) Interruptor ON/OFF CONEXION A TIERRA Mango 1. Este producto está diseñado para circuitos nominales de 120 voltios y tiene un enchufe para conexión a tierra similar al de la Figura 1. Válvula de seguridad Cerciórese de conectarlo a un tomacorrientes cuya configuración sea similar a la del enchufe.
  • Página 16: Mantenimiento

    Compresores Sin Aceite Funcionamiento HUMEDAD EN EL AIRE COMPRIMIDO (Continuación) La humedad que se acumula en el aire comprimido se convierte en gotas a medida que sale del cabezal del compresor de aire. Cuando el nivel de humedad es muy alto Reinicio del motor - (no se muestra, o cuando el compresor ha estado en uso continuo por mucho tiempo, ésta se acumulará...
  • Página 17: Protector Térmico

    Serie FP2090, FP2091, FP2094 Mantenimiento CONCLUSIÓN DEL 5. Debe desconectar la manguera del TRABAJO/ALMACENAJE compresor y colgarla con los (Continuación) extremos hacia abajo para que toda 1. Coloque el interruptor de ON / OFF humedad se drene. (I / O) en la posición OFF ( O ) PROTECTOR TÉRMICO (apagado).
  • Página 18: Guía De Diagnóstico De Averías

    Compresores Sin Aceite Guía de diagnóstico de averías Problema Posible(s) Causa(s) Acción a tomar El compresor 1. El interruptor está en la posición 1. Asegúrese de que el compresor esté enchufado y que OFF (apagado) no funciona el interruptor esté en la posición ON (encendido) 2.
  • Página 19 1. DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año. 2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400 3.
  • Página 20 FP2090, FP2091, FP2094 Oilless Compressors / Compresseur Sans Huile / Compresores Sin Aceite Notes Notes Notas...

Este manual también es adecuado para:

Fp2091 serieFp2094 serie

Tabla de contenido