Conceptronic C100S8A Manual Del Usuario página 8

ENGLISH
• Connect the power adapter to the DC input of the switch and to a free wall outlet.
All LED's of the switch will blink shortly, indicating that the switch is starting.
When the power LED remains on, the switch is powered and active.
• Connect your network devices (computer, notebook, printer, router, etc.) to the LAN ports of the
switch. When a connected device is turned on, the Link/ACT LED of the corresponding port will turn on
and the Speed LED will indicate the connection speed.
Below you will see an example of connected devices to the switch:
Notebook PC
Your 10/100 Mbps Ethernet Switch is now ready to use!
5. Connecting the switch
NAS Mediaplayer Notebook
8
IP-Camera PC Router