Hama 00121770 Instrucciones De Uso página 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
The HDMI switching desk allows you to use three digital
HDMI-compatible video sources with digital playback
devices that support HDMI. The switch is speci cally de-
signed for use in home cinemas to operate, for example,
a Blu-ray player and a satellite receiver at the same time
on a playback device with Ultra-HD cinema quality.
1. Explanation of Warning Symbols and Notes
Note
This symbol is used to indicate additional information
or important notes.
2. Controls and displays
HDMI switching desk
1. Function LED (HDMI input 1-3)
2. Power LED
3. Infrared sensor
4. Source button (switching the HDMI inputs)
5. USB port (for power supply)
3. Package contents
• HDMI switching desk
• Remote control
• Operating instructions
4. Safety Notes
• The product is intended for private, non-commercial
use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheat-
ing, and only use it in a dry environment.
• Children should be supervised to ensure that they do
not play with the device.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according
to locally applicable regulations.
2
• Do not modify the product in any way. Doing so voids
the warranty.
• Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
5. Functions
• Easy to switch between up to 3 HDMI sources (e.g.
Blu-ray player, receiver, computer, games console)
• Quick and easy switching using a remote control
• Automatic selection of the input source when
switching on
• No additional power supply required, the power is
supplied via the connected devices
• Supports 3D and 4K Ultra-HD resolution
6. Getting started and operation
• Connect the source devices (e.g. Blu-ray player,
receiver, computer, games console) to the HDMI inputs
(input 1-3) using HDMI cables (not included in the
delivery package). The LED that corresponds to the
active input (1) lights up.
• Now connect your output device (e.g. TV, projector,
monitor) to the HDMI outputs using HDMI cables (not
included in the delivery package).
• Turn on the connected devices. The power LED (2)
lights up.
• You can now select all inputs via the remote control.
• It is also possible to select the source directly on the
HDMI switching desk using the Source button (4).
Information about the power supply
In some cases, it may be necessary to provide the
HDMI switching desk with additional power via the
USB socket (5). To do this, connect a micro USB / USB
cable to the USB socket (5) and a free USB port on
your TV or a USB power adapter (5 V / 100 mA, not
included in the delivery package).