GE 34455 Manual De Instrucciones página 7

ch
Programming Your Remote
4. Use the number buttons on the
enter
5. Point the remote at the device. Test
6. Repeat this process for each device you wish
strm
to control.
Programming Notes
• Some codes may operate only a few functions of
your device. There may be another code in the
Code List that controls more functions. Test other
codes in the Code List for more functionality.
• If you do not find a remote code that works your
device or there are no codes in the Code List for
your device, use the Auto Code Search method in
the next section to program your remote.
• For combination devices such as a TV/DVD combo
or TV/ VCR combo, you may have to enter a code
for each device. See the Controlling Combo
Devices section.
• Write down the remote codes used to program the
remote for future reference.
remote to enter the first 4-digit
remote code you circled in the Code
List in Step 1. The red light will turn off
after entering the fourth digit.
the buttons on the remote to see if
the device responds as you would
expect. If the buttons do not operate
the device, return to Step 2 above and
use the next code that you circled for
that device.
input
ch
enter
7