Code Identification; Reset To Factory Settings - GE 34455 Manual De Instrucciones

strm input
ch
Using Your Remote

Code Identification

ch
strm input
strm input
enter
enter

Reset to Factory Settings

1. Press and hold down the SETUP
ch
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the desired device
button (tv, dvd, cbl, strm) you would
ch
like the code for.
strm input
3. Press and release the ENTER button.
4. Press and release the #1 button.
Count the number of times the
remote light flashes. This is the
strm input
number corresponding to the first
digit of the code. Repeat the process
ch
by pressing the #2, #3 and #4
enter
buttons for the remaining digits.
5. Press and release the ENTER button
to exit this mode.
enter
ch
1. Press and hold down the SETUP
button on the remote until the red
ch
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
strm input
2. Press and release the MUTE button.
3. Press and release the number #0
enter button. The red indicator light will
flash twice.
ch
enter
enter
11