Hammerhead HLCLG01 Manual Del Usuario página 12

OPERATION
To choose a projection mode, press the mode button:
a. Press the button once to select the horizontal laser line.
b. Press the button twice to select the vertical laser line.
c. Press the button three times to return to the cross-hair pattern (both
horizontal and vertical lines).
4. SELF-LEVELING MODE (Fig.4)
Your compact self-leveling cross line
laser has two working modes: self-
leveling mode and lock (manual) mode.
In self-leveling mode, the tool will level
itself if it is within ±4° of horizontal.
a. Place the compact self-leveling
cross line laser on a flat, smooth
surface that is within ±4° of
horizontal.
b. Turn the tool on by sliding the
power switch in the direction of the "ON" arrow. The compact self-leveling
cross line laser will automatically level within 6 seconds. The LED indicator
will illuminate in green.
c. Press the mode button until the desired laser-projection mode is achieved
and the laser line is projected from the laser aperture.
d. If the surface on which the compact self-leveling cross line laser is placed
exceeds ±4° from horizontal, the laser line will blink as an alarm and the
LED indicator will turn to red. In this event, adjust the angle of the surface
slightly.
e. To turn off the laser lines, slide the switch in the direction of the "OFF"
arrow.
12
4
COMPACT SELF-LEVELING CROSS LINE LASER WITH CLAMP