Descriptive Diagram; Instructions For Use - FAR MB 16 CI Manual Del Usuario

ENGLISH

DESCRIPTIVE DIAGRAM

No. Part name
1 Body
Cover with
2
handle
3 Seal
4 Tap unit
5 Pulling handle
Extension tube
6
(5x)
Drip tray with
7
grate
GB-8
No. Part name
8 LED
9 12 V power cable
AC power cord with
10
plug
11 AC power
12 DC power
13 On/off light
14 Voltage selector

INSTRUCTIONS FOR USE

1. A Heineken 5 litre keg with
internal pressure is best.
2. Insert the extension
tube into the small hole
on the top of the beer
keg.
3. When the ambient temperature
is 25 °C and the keg of Heineken
beer has been
placed in the
appliance, turn
on the appliance with DC
or AC power for 48 hours.
The appliance lowers the
temperature of the beer,
then maintains it, the screen
displays the temperature.
4. The tap must be securely
assembled. Normally, the
pull handle should be in
a vertical position. Lower
it to 15° and the beer will
begin to be dispensed.
ENGLISH
GB-9