Installation; Start-Up And Operation - auna IR-260 Manual Del Usuario

EN
34

INSTALLATION

• Unpack all parts of the device and remove all packing material.
• Do not insert the power plug of the appliance into the power outlet until
you have checked the voltage of the outlet and all connections have
been made.

START-UP AND OPERATION

First use
Before use, make sure that the voltage indicated on the nameplate of the
device corresponds to the voltage of the power outlet. Insert the supplied
power plug into the power outlet. Turn on the power using the power
switch on the back of the machine. When you use the machine for the
first time, it is necessary to set the language and network settings on the
machine.
You can connect to the network either immediately or at a later time.
Use the NAVIGATE/OK/VOL knob to select the desired options. Press the
NAVIGATE/OK/VOL. knob to confirm.
If you press the POWER button while the power is on, the unit will go into
standby mode. If you press the button again, the unit will be turned on
again.