Selecting A Different Track; Locating A Specific Passage - Insignia NS-C2116 Guia Del Usuario

To play a CD:
1 Slide the AUTO/ON/OFF switch to the ON position.
2 Slide the FUNCTION switch to CD.
3 Open the CD compartment by pressing the OPEN/CLOSE spot
on the top of the CD clock radio.
4 Press a CD or CD-R disc, with the label side up, onto the spindle,
then close the CD compartment.
5 Press the PLAY/PAUSE
PLAY/RAND indicator lights.
• To pause playback, press the PLAY/PAUSE
PLAY/RAND indicator blinks.
• To resume playback, press the PLAY/PAUSE
again.
6 Adjust the VOLUME control to a comfortable level.
7 Press the STOP

Selecting a different track

To select a different track on a CD:
1 While a CD is playing, press the SKIP Up
next track, or press repeatedly until the track you want begins
playing.
2 Press the SKIP Down
the current track, or press repeatedly to go to a previous track until
the track you want begins playing.
3 If you selected a track while the CD is stopped or paused, press
PLAY/PAUSE

Locating a specific passage

To locate a specific passage within a track:
1 While a CD is playing, press and hold the SKIP Up
Down
2 When you reach the passage you want, release the button and
normal playback resumes.
12
button to stop the CD playback.
button once to return to the beginning of
to begin playback.
/
button. The CD plays at high speed and low volume.
www.insignia-products.com
Insignia NS-C2116 CD Clock Radio
button to start playback. The
/
/ button. The
/ button
button once for the
or SKIP