Rigid WD40700 Manual Del Usuario

DUE TO COVID-19 PPE MASK SUPPORT
Due to raw materials that are normally used in our production of the 3-Layer Fine Dust filter component (VF3500)
being redirected for PPE mask manufacturing support, we are unable to provide the filter previously included
with this product.
We are temporarily replacing the 3-Layer Filter (VF3500) component. We are providing you with a 1-Layer
Filter (VF3400) component and a dust collection bag. Please note the dust collection bag was not typically
included with this product purchase.
This dust bag lets you clean up small, dry debris such as drywall dust, and is an excellent containment solution
for many fine dust messes. See dust bag for installation and removal instructions and discard the bag once full.
Replacements can be purchased as VF3501.
The material used in our vacuum filters and bags is intended only to protect the vacuum and the end-users
of our products from particles or debris under operation conditions listed in the product's instruction manual.
FILTER PREVIOUSLY INCLUDED
VF3500
FOR QUESTIONS OR INFORMATION CONTACT US AT 1-800-4-RIDGID (1-800-474-3443) from the US and Canada
QUICK & EASY DRY DEBRIS DISPOSAL USING DUST BAGS
Clean Drum vs. Dirty Drum
1 - Simply spread the bag out around the inside of the drum.
2 - Push cardboard collar onto drum inlet and behind rib(s) so that cardboard is flush
against inside of drum.
3 - Replace power head with filter attached ensuring the dust bag sits surrounding the filter.
This ensures you will get the most debris inside of the dust bag and the cardboard collar of
the dust bag stays in place.
TEMPORARY COMPONENT CHANGE
SIZE C - VF3501
Dust Collection Bag Installation Instructions
Please see reverse side for French • Voir l'anglais au verso
SUBSTITUTE FILTRATION
VF3400
Easy to Install
VF3501
Easy to Dispose