Blowing Feature; Cord, Hose And Accessory Storage - Rigid WD40700 Manual Del Usuario

Operation (continued)

Blowing Feature

Your Wet/Dry Vac has the capability to
be used as a blower for yard work,
patio cleanup and workshop applications
to blow sawdust and other debris.
WARNING:
!
Always wear safety eyewear
complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before using as
a blower.
WARNING:
!
To reduce the risk of injury to
bystanders, keep them clear of
blowing debris.

Cord, Hose and Accessory Storage

1. Your Vac has a convenient area to
store your Power Cord and Vac Hose.
2. Wrap the Power Cord around the top
of the Handle on the Vac and attach
the end of the Plug to the Cord.
3. Wrap the Hose around the Vac as
shown and place the small Swivel End
inside the larger one.
4. The Car Nozzle is stored in the Car
Nozzle Compartment located on top of
the Handle.
5. The Storage Bin holds the Utility
Nozzle and two Extension Wands.
Car Nozzle
Compartment
Handle
!
Wear a dust mask if blowing creates
dust which might be inhaled.
!
To reduce the risk of hearing
damage, wear ear protectors when
using the Vac/Blower for extended
time or in a noisy area.
Storage Bin
Storage Bin
Extension Wand
Placement
Extension Wand
Extension Wand
Placement
Placement
Extension Wand
Hose
Placement
Storage
Utility Nozzle
Area
Placement
Utility Nozzle
Placement
Storage
Bin
Storage
Accessory
Bin
Storage Bin
Power
Cord
7
CAUTION:
CAUTION:
Empty Storage Bin
Empty Storage Bin
Filled Storage Bin
Filled Storage Bin
Accessory
Storage Pins
Accessory
Storage Pins
Utility Nozzle
Placement
Utility Nozzle
Placement