Operation; Polarized Plug - Rigid WD40700 Manual Del Usuario

Operation

WARNING:
!
• Do not leave Vac running while unattended - you may fail to notice
important signs indicating abnormal operation such as loss of suction,
debris/liquid exiting the exhaust, or abnormal motor noises. Immediately
stop using Vac if you notice these signs.
• Do not leave Vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables. Do not operate
Vac near flammable liquids or in areas with flammable gases, vapors, or
explosive/airborne dust. Flammable liquids, gases, and vapors include:
lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol,
and aerosol sprays. Explosive dusts include: coal, magnesium, aluminum,
grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not leave sawdust or rags with stain or polyurethane residue inside Vac.
Empty drum after picking up these potentially self-heating materials.
WARNING:
!
• Do not expose to rain or allow liquid to enter motor compartment.
Store indoors.
• Do not handle plug, switch, or Vac with wet hands.
• Unplug Vac before servicing. If your Vac is not working as it should, has
missing parts, has been dropped, damaged, left outdoors, or dropped into
water, return it to an authorized service center or call customer service.
• When using an extension cord, use only outdoor-rated cords that are in good
condition. Do not allow the connection to come into contact with liquid.
CAUTION:
!
protectors when using the Vac/Blower for extended time or in a noisy area.

Polarized Plug

To reduce the risk of electric shock,
this Appliance has a Polarized Plug
(one blade is wider than the other except
230 volt models). This Plug will fit in a
Polarized Outlet only one way. If the Plug
does not fit fully in the Outlet, reverse
the Plug. If it still does not fit, contact a
qualified electrician to install the proper
Outlet. Do not change the Plug in any way.
After you Plug the Power Cord into the
Outlet, turn the unit on by pushing the
Switch from position "O" to position "l".
The symbols used on the Switch Actuator
are international "On & Off" symbols.
= OFF
To reduce the risk of fire, explosion, or damage to Vac:
To reduce the risk of electric shock or injury:
To reduce the risk of hearing damage, wear ear
Familiarize yourself with the Accessories
included with the Vac. Each Accessory
may be used in various ways for
vacuuming and blowing debris. Here is
a list of the Accessories and their uses.
Car Nozzle - Dry pickup nozzle for car
interiors and most upholstery cleaning.
Utility Nozzle - General purpose nozzle
for most vacuuming applications.
Extension Wands - These wands can
be connected together and provides
additional length for more reach.
Hose - Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
= ON
and nozzles.
5