Tabla de contenido
Publicidad
One Speaker (4 ohm voice coil)
One 4 ohm voice coil woofer results in a 4 ohm load to the amplifier
Figure 3
Figura 3
Abbildung 3
1. Connect the speaker by connecting the positive (+) terminal of the woofer to the
positive (+) terminal on the amplifier. Wire the negative (-) terminal of the woofer
to the negative (-) terminal on the amplifier.
© 2012 MD Audio Engineering—all rights reserved
_
4 ohm
+
+
_
5
Publicidad
Tabla de contenido
