Eaton Metalux ADF140678 Instrucciones De Instalación

ADF140678
Installation Instructions – Standard Highbay Motion Sensor (MS)
Instructions d'installation – Détecteur de mouvements standard
Highbay (MS)
Instrucciones de instalación – Para el sensor de movimiento (SM)
Highbay estándar
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a person
familiar with the construction and operation of the
product and the hazards involved. Cooper Lighting
assumes no responsibility for claims brought about
by improper or careless installation or handling of this
product.
WARNING
Risk of Fire and Electric shock. If not qualified, consult
an electrician.
CAUTION
Edges May Cut. Handle with care.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION: Receiving Department; Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Lamps contain mercury, dispose according to
local, state, or federal laws.
NOTICE: If supply wires are located within 3 inches of
ballast, use wire rated for at least 90°C (194°F).
NOTICE: Minimum 90°C supply conductors.
Brand Logo
reversed out of
black
INS # INS #