Eaton Metalux ADF140686 Instrucciones De Instalación

ADF140686
Installation Instructions – Micro-Bay Motion Sensor (End Mount)
Instructions d'installation - Détecteur de mouvements Micro-Bay
(montage d'extrémité)
Instrucciones de instalación del sensor de movimiento de la
luminaria Micro-Bay (montaje en extremo posterior)
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Cooper Lighting assumes no responsibility for claims
brought about by improper or careless installation or
handling of this product.
ATTENTION
Receiving Department: Note actual fixture description
of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly
with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material,
complete with original packing must be retained.
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
Green ground screw provided in proper location. Do not
relocate.
If supply wires are located within 3 inches of ballast, use
wire rated for at least 90°C (194°F).
Lamps Contains Mercury, Dispose according to local,
state, or federal laws.
Minimum 90°C supply conductors.
.
Brand Logo
reversed out of
black
INS # INS #
WARNING
NOTICE
NOTICE
NOTICE
NOTICE