Metalworks SLG2000 Manual De Usario página 13

Ocultar thumbs Ver también para SLG2000:
Tabla de contenido

Publicidad

Putting into operation-In gebruik nemen- Mise en service-Puesta en marcha
Observe the mains voltage: The voltage of the power source must agree with the value given on the nameplate of the
GB
unit. Extension cords must have a conductor cross section of 2×1.5mm
Switching on:
Set the switch to or , according to the application.
Switching off:
Set the switch to 0.
Let op de netspanning: De spanning van de stroombron moet overeenkomen met de waarde die op het typeplaatje
NL
van het apparaat. Verlengsnoeren moet een geleiderdoorsnede van 2 x 1.5mm2 min hebben.
Inschakelen:
Zet de schakelaar op
Uitschakelen:
Zet de schakelaar op 0.
Respecter la tension: La tension de la source d'alimentation doit correspondre à la valeur indiquée sur la plaque
F
signalétique de l'appareil. Les rallonges électriques doivent avoir une section de conducteur de 2 × 1.5mm2 min.
Mise en marche:
R
g lez le commutateur sur
é
Arrêt:
Réglez le commutateur à 0.
Observe la tensión de red: La tensión de la fuente de energía debe coincidir con el valor indicado en la placa de la
E
unidad. Los alargos deben tener una sección transversal del conductor de 2 x 1.5mm2 min.
Conexión:
Coloque el interruptor en
Desconexión:
Coloque el interruptor en 0.
For unit, we provide a guarantee in accordance with the legal/country-specific regulations from the date of purchase
GB
(verified by invoice or delivery document). Damage that has occurred will be corrected by replacement or repair.
Damage attributable to normal wear and tear, overload or improper handling will be excluded from the guarantee.
If the unit should fail despite the care taken in manufacture and testing, repair should be carried out by an authorized
customer service agent for power tools.
Voor eenheid, bieden wij een garantie in overeenstemming met de wettelijke / landspecifieke voorschriften vanaf de
NL
datum van aankoop (gecontroleerd door factuur of levering document). Schade die is ontstaan zal worden
gecorrigeerd door vervanging of reparatie.
Version 201308 1.0
of
, afhankelijk van de toepassing.
ou, selon l'application.
Ⅰ Ⅱ
o
, de acuerdo con la aplicación.
Guarantee-Garantie-Garantia
722410001GBNFE
2
min.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

722410001

Tabla de contenido