Tabla de contenido
Publicidad
WARNING
Do not work in a potentially explosive environment. Check the surrounding before starting to work. Do
not work on fuels or gas containers or in their vicinity, even when they are empty.
WARNING
in ceilings, floors or cavities, and ignite them. Inspect the work area before starting to work and in case
of doubt, abstain from using the hot air tool. Do not point the unit at the same spot for extended
periods
WARNING
by. The unit must be supervised at all limes during operation. When allowing the switched off unit to
cool down, always place it down vertical and standing. Allow the unit to cool down completely.
WARNING
easily inflammable and can lead to explosions. Be prepared for flames to develop and keep suitable
fire-extinguishing means at hand.
WARNING
develop that can be aggressive or toxic. Avoid breathing in vapours, even when they appear to be
harmless. Always provide for good ventilation of the work area or wear a respirator.
WARNING
the heating element or the nozzle leads to skin burns. Keep children and other persons away from the
unit. Do not touch the tube of the heating element or the nozzle when they are hot. Do not use the unit
as a hair dryer. It develops much more heat than a hair dryer. Do not use the unit to heat up fluids or to
dry objects or materials that are destroyed through the influence of hot air.
WARNING
of the thermal relay can lead to injuries. Make sure that the switch is set to OFF when connecting the
unit to the mains supply. Switch the unit OFF when the thermal relay has actuated
WARNING
lead to burns. Use only original accessories for your model that are listed in these operating
instructions.
WARNING
: Danger of injury and fire. The hot air tool is dangerous for children. Keep the hot air tool
out of the reach of children.
DANGER
: Danger of lead overheating! Incorrect handing can lead to an accumulation of heat and thus
damage the unit. Do not operate the unit when it is placed down horizontally or when pointed downward.
The air –intake opening and the nozzle must not be covered. Use only nozzles that are suitable for your
unit.
Version 201308 1.0
: Danger of explosion! The hot air tool can explosively ignite combustible fluids and gases.
: Danger of fire! Heat can reach combustible materials that are hidden behind coverings,
: Danger of fire! An unsupervised operating hot air tool can set fire to objects that are close
: Danger of fire! When working plastics varnish or similar materials, gases develop that are
: Danger of intoxication! When working plastics, varnish or similar materials, gases
: Danger of injury! The hot air jet can injure persons or animals. Touching the hot tube of
: Unintentional starting or unexpected switching on of the heating element after actuation
: Danger of injury! Using an air flow reflection nozzle that is not suitable for your unit can
722410001GBNFE
3
Publicidad
Tabla de contenido
