Instalación y configuración del sistema
Instalación y configuración del sistema
Instalación del proyector
1.
Mount whiteboard/projection screen in desired
location on wall if necessary. The top of the
whiteboard/projecction screen should be at least
86" (2.18 m) from the floor.
2.
The DMS 800 can project an image size
between 50" (1,270 mm) and 85" (2,160 mm),
measured diagonally (when mounted on the
same plane as the projected surface). Measure
the whiteboard if necessary to determine the
size image you intend to use.
3.
Attach the paper mounting template to the wall
above the whiteboard/projection screen. The
center line of template should be aligned with
the center of the desired projection area.
4.
Align the appropriate line on the template with
the top of the whiteboard/projection screen
according to the image size.
5.
Ensure that the "level" line on the template is
level. Mark the five mounting screw locations
on the wall. Remove the template.
6.
Determine the appropriate anchor to use with
your wall type. Install five anchors at the
marked locations.
44
86"
(2.18 m)
to floor
30"
50"
(762 mm)
(1270 mm)
40"
(1016 mm)
Wall
Mounting Template
Whiteboard/Projection Screen
Masonry
Hollow Wall
Solid Wall/ Wall Stud
© 3M 2006. Todos los derechos reservados.
DMS serie 800 de 3M™
Whiteboard/
Whiteboard/
Projection Screen
Projection Screen
85"
51"
(2160 mm)
(1295 mm)
68"
(1728 mm)
Level
Align center line
Mounting screw location (1 of 5)
Alignment for desired image size