Tabla de contenido
Publicidad
DMS serie 800 de 3M™
7.
Hang the metal mounting plate on the screws
and tighten securely.
8.
Hang the projector by aligning and hooking the
unit on the metal mounting plate.
Note: Ensure locking pin is engaged. You should
hear a click once the unit is securely on mounting
plate.
9.
Using 2 people, slightly push up on the unit to
make sure unit is locked on mounting plate
10. Attach the safety cable securely to the wall with
an appropriate anchor.
Note: Fully extend safety cable and then secure to
wall. If necessary, use tie wraps to minimize cable
slack.
© 3M 2006. Todos los derechos reservados.
Instalación y configuración del sistema
Attatch safety cable securely to stud or solid wall.
Cable should have no slack.
45
Publicidad
Tabla de contenido
