Gallagher B40 Instrucciones página 8

Step 2. Connect the Energizer to fence and earth
1. Place the Energizer on the ground close to the fence but out range of any stock.
2. Connect the fence leads (green and red) to the Energizer terminals.
Refer to the Terminals sec on (p. 9) for further details.
3. Insert earth stake into the ground.
4. Connect the green lead to the earth stake.
5. Connect the red lead to the fence.
Step 3. Switch the Energizer on
Using the rotary dial, switch the Energizer on to the desired opera ng mode and
confi rm the indicator LED is fl ashing with each pulse.
8
Gallagher 3E2301 B40 Portable Fence Energizer