Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Ingersoll-Rand No. 50
Always use an air line lubricator with these tools.
We recommend the following Filter-Regulator-Lubri-
cator (FRL) Unit:
Model Free Speed
Pad Diameter
I.D.
rpm
in
311G
12,000
6
■
Tested in accordance with PNEUROP PN8NTC1.2
♦
Tested in accordance with ISO8662-1 sanding on steel workpiece
•
Tested in accordance with ISO3744
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and the parts be separated by material so that they can be recycled.
LUBRICATION
INSTALLATION
Main Line(s) Inner Ø
to be 3X Size of
Air Tool's Inlet Ø
To Air
System
To Air
Tool
Emergency
L
Shut-Off
Valve
Lubricator
Regulator
Drain Regularly
SPECIFICATIONS
■
Sound Level
dB (A)
mm
Pressure
152
87.3
SAVE THESE INSTRUCTIONS. DO NOT DESTROY.
Inside USA use FRL unit #C28-04-FKG0-28
Outside USA use FRL unit #C28-C4-FKG0
Before starting the Tool and after each two or
three hours of operation, unless the air line
lubricator is used, detach the air hose and inject
0.5 - 1.0 cc of Ingersoll-Rand No. 50 Oil into the air
inlet.
Branch Line(s) Inner Ø
to be 2X Size of
Air Tool's Inlet Ø
R
F
Filter
FRL
Compressor
♦
Vibrations Level
• Power
2
m/s
100.3
6.3
NOTICE
3
(Dwg. TPD905-2)
Inlet
Connection
(Thread)
(Air Hose)
NPT
1/4
Minimum
Inside Ø
in (mm)
3/8 (10)
Publicidad
Tabla de contenido
