Kohler 1285422-2-B Guía De Instalación Y Cuidado página 5

2" (51 mm)
Min
2. Mount the Filter Head
IMPORTANT! This unit is designed for vertical installation.
IMPORTANT! The mounting location of the water filtration system
is critical. Verify that the bottom of the filter cartridge will be at least
2" (51 mm) from the floor of the cabinet. Ensure that the system will
not interfere with other items and will be easily accessible. Make
sure that the tubing will not be under tension when installed.
NOTICE: Select mounting fasteners (not provided) appropriate for
the cabinet wall material.
Align the mounting holes of the filter head at the determined
mounting location.
Mark the mounting-hole locations with a permanent marker. Set
the filter head aside.
Predrill the mounting holes, if necessary, based upon the fasteners
selected.
Partially thread the fasteners into the cabinet wall, and slide the
filter head over the fasteners.
Secure the filter head in position by tightening the fasteners.
Kohler Co. 5 1285422-2-B