Kohler 1285422-2-B Guía De Instalación Y Cuidado página 6

Unfiltered Water
Faucet Supply
Water Supply
3/8" Cold
Adapter
Water Supply
3. Connect the Tubing
CAUTION: Risk of property damage. Do not damage, kink,
or crimp the tubing. Avoid cutting the tubing. If it is
necessary to cut the tubing, use a sharp utility knife to make
a clean and square cut to avoid water leakage.
IMPORTANT! Water from the supply line must be connected to the
filter head inlet. Water from the filter head outlet must be connected
to the faucet. System performance and filter capacity will be
compromised if connected incorrectly.
Wet the end of one of the tubing sections with water, and press it
firmly into the inlet port of the filter head.
Wet the other end of the tubing with water, and press it firmly
into the water supply adapter.
Repeat for the other tubing section, pressing one end into the
outlet port of the filter head. Press the remaining end into the
filtered water faucet adapter.
Connect the filtered water faucet inlet to the filtered water faucet
adapter.
If used, connect the unfiltered water faucet inlet to the tee.
Press the cover onto the filter head.
If desired, secure the tubing to a cabinet wall using appropriate
clamps and hardware (not provided).
1285422-2-B
Cover
Inlet
Outlet
Use water to wet the
tubing ends.
6
Filtered Water
Faucet Adapter
Kohler Co.