Directions For Use; Cleaning & Maintenance; General Cleaning - Guardian Technologies AC4150 Instrucciones De Uso Y Cuidado

DIRECTIONS FOR USE

SET UP
1. Select a firm, level and flat location for the air purifier. For proper air flow, locate the unit at
least 1 foot from any wall or furniture. Make sure none of the grills are blocked.
2. Carefully remove your air purifier from box and bag.
3. Adhere 4 felt pads to unit base to protect table top surface. Remove adhesive backing
and apply one pad to each corner of unit base.
OPERATING THE AIR PURIFIER
1. Plug the power cord into a 120V AC outlet.
2. Select 1 of the 3 project lenses. Rotate
lens cap counter clockwise to unlock
position and lift off. Replace with new
lens cap and rotate clockwise to
lock position.
3. Turn unit power ON.
• Select fan speed MODE 1-3
= lowest speed setting
= highest speed setting
4. Select UV-C ON or OFF using UV-C button.
5. Push button on projector lens to control lights.
One push - 3 colors auto-rotate
Continue to push for specific color
E-6
4 Felt Pads
Power & Variable
Speed Control
UV-C Control
Projector Lens Button

GENERAL CLEANING

Always unplug the unit before cleaning or servicing in any way.
Caution: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc. on and/or in the unit
while cleaning as they will damage the product. NEVER use alcohol or other solvents.
Note: Do NOT stick any foreign objects or your fingers inside the unit.
1. Wipe the surface of the unit with a clean, dry soft cloth as needed.
2. Clean the Filter monthly with the brush of your vacuum cleaner.
3. Remove and Clean (or Replace) Filter.
a. Lift and remove the Rear Cover
from the unit.
UV
c. Separate and clean both filter layers with
the brush attachment of your vacuum cleaner
to remove lint and dust.
IMPORTANT: Do NOT try to wash and re-use
the Combination Filter.
e. Reattach the Rear Cover of the unit and securely latch into place.
IMPORTANT: Do NOT try to wash and re-use the Combination Filter. Please contact Customer
Service at 1.866.603.5900 or visit us at www.guardiantechnologies.com to purchase a
replacement filter. Replacement Combination Filter: E (FLT4100)
CLEANING & MAINTENANCE
b. Remove Combination Filter from unit.
Note: Pre-Filter/Charcoal is affixed to HEPA
Filter with Velcro.
d. Insert Combination Filter into the unit
with the HEPA portion facing into the unit.
Consult the arrow on the filter for correct
installation direction.
E-7