8. Adjusting Storage Shelf Dividers
Your tablet charging station comes with one (CS16AC) or two (CS32AC) storage shelves with
adjustable dividers that each can accommodate up to 16 personal electronic devices per shelf.
8.1 Adjusting the CS16AC and CS32AC Shelf Dividers
Remove any personal electronic devices stored on the shelf tray. Then unlock and open the rear
door to the cabinet. From the front or rear of the cabinet, rearrange the dividers by pulling them out
or snapping them into the shelf tray. Repeat as necessary for additional shelf trays.
9. Specifications
Model
Cabinet Dimensions (H x W x D)
Unit Weight
Load Capacity*
Cabinet Mounting Depth
(Adjustable)
AC Receptacles
Power Requirement
Operating Temperature
Operating Humidity
Number of AC Charger Units
AC Charger Dimensions per Unit
(H x W x D)
Enclosure Material
Regulatory Approvals
*Full wall-mount load capacity requires a mounting surface capable of bearing the full load of the tablet charge and sync station and all connected components. Rolling applications
require optional SRCASTER accessory kit. Specifications may be subject to change without further notice.
10. Optional Casters
An optional caster accessory kit (Model: SRCASTER) is available for purchase through Tripp Lite
(visit www.tripplite.com for details). The SRCASTER Kit's 4 casters and mounting hardware install to
the pre-drilled holes located on the base of the enclosure. For further installation instructions, refer
to the manual included with the SRCASTER Kit.
CS16AC
21.6 x 23.63 x 21.6"
(549 x 600 x 549 mm)
55 lb (25 kg)
200 lb (90 kg) Stationary or Rolling
3" to 20.5"
(76 to 521 mm)
16 x 5-15R
Input: 120V AC, 50/60 HZ, 12 Amps
32° to 104° F
0° to 40° C
5 to 95% RH, Non-Condensing
1
2.25 x 19 x 4"
(57 x 483 x 241 mm)
Metal
UL 60950, NOM (Mexico) and RoHS
CS32AC
35.6 x 23.6 x 21.6"
(905 x 600 x 549 mm)
96 lb (43.5 kg)
250 lb (113 kg) Stationary or Rolling
3" to 20.5"
(76 to 521 mm)
32 x 5-15R
Input: 120V AC, 50/60 HZ, 12 Amps
32° to 104° F
0° to 40° C
5 to 95% RH, Non-Condensing
2
2.25 x 19 x 4"
(57 x 483 x 241 mm)
Metal
UL 60950, NOM (Mexico) and RoHS
7