Allen + Roth F170185-A1 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
4. Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the
butterfly screw found on the cylinder holder, so that the cylinder cannot move from side to side or
fall down. Connect the regulator, screw the black handle clockwise to tighten, turn the black
handle counterclockwise to remove. The knob on the control panel is turned all the way to the
"OFF" position when the fire pit is NOT in use (see Figure 4).
5. Attach the door (B) with fire pit pedestal (A)gently (see Figure 5).
6. Cover the fire pit with the outdoor Weather cover (D) when not in use to protect it from the
elements or when fire pit is cool COMPLETELY after use (see Figure 6).
B
Figure 4
A
Figure 5
D
Figure 6
6
black knob