Parts Description - Smartwares CIP-39220 Manual De Instrucciones

PARTS DESCRIPTION

1. Lens
2. MicroSD card slot
3. Antenna
4. LAN connection/Notification LED
5. Power input
6. Reset button
INSTALLATION
• Attach the mount to the wall with the supplied screws and plugs.
Make sure they are suitable for your type of wall.
QUICK START GUIDE
Follow the instructions below to quickly get started with your camera.
For a more detailed description of all functionality, please check the
help function in the app or download the extended user manual from
our website, www.smartwares.eu. Please search for "CIP-39220".
Inserting an SD card
• First make sure your camera is not connected to the power
adapter. Insert your MicroSD card all the way in the MicroSD
card slot on the camera. Only use a class 10 MicroSD card (max
128 GB).
• A MicroSD card is required for recording footage.
Download the app
• iOS: Search for "SW360" in the Apple app store.
• Android: Search for "SW360" in the Google play store.
• Download and install the app on your mobile device.
Creating an account
If you're using this app for the first time, you will need to create an
account.
• Open the app.
• Tap on "New User"
• Fill in your email address.
• Enter a new password, and confirm it.
Note: It's not possible to paste the code, you need to type it.
• A verification email will be sent to you. Please click on the link in
the mail to confirm your account. If you don't confirm, you won't
be able to continue using your account.
• Now open the app again and login to the account you just
created.
• If you already have created an account, fill in your login and
password information, and tap on "Sign in".
• If you have forgotten your password, tap on "Forgot password",
and follow the directions in the app.
Connecting a camera
1. On the "my devices" tab, tap on the "plus" (+) sign in the top right
corner. Tap "Add a new device".
2. Tap on the picture that corresponds to your camera.
3. Plug the adapter in the power input. Please wait for 30 seconds for
the device to boot up. Make sure that your camera is in close range
(1m) of your mobile device.
4. Check if the notification LED is flashing, and confirm the prompt in
the app. If the LED is not flashing, please refer to the chapter
"Resetting the camera".
iOS
Instruction manual
Android
EN
3