SATA 51311 Manual Del Uso página 20

5 ）
Switching machine operation:
Check whether the switching operation of the tool is easy and ensure that the switch is in the off state before plugging in.
a ） Power on: Press the switch and the tool starts. Press the switch lock button again to lock the working status of the tool.
Shutdown: Press the switch firmly and release it. The switch and the switch lock button will automatically pop up and the tool
will stop working.
b ） Move the workpiece only after starting the tool.
Practical application:
In order to reduce the risk of explosions, electric shocks, and injuries, it is necessary to check the presence of subtle wire, gas,
and water supply pipes under the surface of the workpiece before starting work!
Ask the operator to firmly hold the main grip of the tool before operating!
1 ） Grinding
a ） The grinding plate and the workpiece are kept at an angle of about 15 degrees, and the parts are in contact with each other.
The effect is the best.
b ） In order to avoid overheating, discoloration or wrinkling of the workpiece, apply a light force to move the body back and forth;
20
51311/05155
中文
EN
15° -30°
DE RU KO PT JA
switch
ES