Rival DC-TB170 Manual De Instrucciones página 7

4. Set Jar into place on Blender Base, making sure it is securely
seated by twisting jar clockwise until it snaps into the locked
position.
5. Plug cord into outlet.
6. Put ingredients in Jar, place Lid on Jar.
7. Process food or beverages. Place hand on Lid when blending
liquids. Push button on Control Panel to start Blender.
8. Always turn blender OFF and wait until blades have stopped
rotating before removing Jar.
9. To remove Jar after blending is complete, hold blender base
with one hand and grasp jar handle with the other hand and
twist jar counter clockwise approximately a quarter turn to
unlock, then lift jar straight up from base.
10. Never place Jar onto unit while motor is running.
6-SPEED
Speeds are Chop, Mix, Grate, Blend, Liquefy, and Pulse/Off.
Pulse is a controlled cycle operation. This means it operates only
while the button is held down. All other speeds are continuous
cycle operation. They operate continuously at whatever speed is
selected until the "Off" button is pressed.
Select the appropriate speed setting for your task: Press the
"OFF" button when finished.
Chop
Chop garlic, herbs, onions—pulse to chop evenly
Mix Prepare pancake or waffle batter
Reconstitute frozen juice
Milk shakes
Cocktails
Grate Finely chop cabbage, carrots or other vegetables (add
½ to 1 cup water and pulse to chop, then drain.)
Grate chunks of cheese (Cut cold cheese into ½ to
1-inch chunks, place ½ cup cheese chunks into blender
and pulse to chop. Very hard cheese, such as Parmesan
should be at room temperature for chopping.)
5