König HAV-MCS52 Manual De Usario página 5

Volume/Sound Controls
This device has multiple sound control options. You can adjust the volume, choose
between different equalizer presets, and turn on/off the bass boost.
Volume UP/DOWN
Use the VOLUME UP/DOWN buttons to control the level of the output volume.
The system remembers the volume level when the power is switched off and
automatically returns to the same level when the power is switched on again.
EQ (Electronic preset equalizer)
Press the EQ button on the remote control to cycle through
the following equalizer settings: FLAT, CLASSIC, ROCK,
POP, JAZZ. The chosen EQ preset briefly appears in the
display to confirm your selection. After that it is indicated in
the bottom of the display. When you switch the device off, it remembers the last EQ
preset, so the next time you switch the audio system on it will automatically choose
that last preset.
DBBS (Dynamic Bass Boost)
Press the DBBS button on the remote control to increase the dynamic bass response.
"DBBS ON" appears briefly in the display and the "DBBS" indicator remains in the
upper right corner of the display. Press the DBBS button again to turn it off.
MUTE
Press the MUTE button on the remote control to shut off the speakers temporarily.
The sound stops and the "MUTE" indicator shows in the display. Press the MUTE
button again to cancel the mute function and restore the volume. The MUTE indicator
disappears. The mute function will also be canceled by pressing the VOLUME UP
button.
1. OPEN/CLOSE BUTTON
2. MEMORY/CLOCK BUTTON
3. FUNCTION BUTTON
4. BAND BUTTON
5. PREVIOUS BUTTON
6. STOP BUTTON
7. PLAY MODE BUTTON
8. FOLDER UP/DN BUTTON
9. EQ BUTTON
10.1-9 NUMERIC
11. SLEEP BUTTON
12. STANDBY BUTTON
13. MUTE BUTTON
14. TIMER BUTTON
15. PLAY/PAUSE BUTTON
16. SKIP BUTTON
17. ST/MO/ID3 BUTTON
18. VOLUME BUTTON
19. DBBS BUTTON
20. 0 BUTTON
5