Programmed Playback - König HAV-MCS52 Manual De Usario

To stop random playback press the PLAY MODE button again. The RANDOM/
SHUFFLE indicator will disappear from the display, and the disc will be played in
normal order again.

Programmed Playback

The Program feature allows you to program a playlist of up to 40 tracks in any desired
order. It's possible to program a single track multiple times within a program sequence.
Programming has to be done before starting playback. If a disc is playing press the
BAND button to stop playback.
1. Load a disc into the CD compartment
2. Press the MEMORY/CLOCK button
3. The MEMORY indicator and PR01 will show in the display
4. Use the NEXT/PREVIOUS buttons to select the first track of the program
5. Press the MEMORY/CLOCK button again to confirm the selected track for the
first program position
6. The display will show PR02 and the system will be awaiting your input for the
second program position
7. Repeat steps 4-5 until the memory is full or your program is complete.
8. Press the PLAY/PAUSE button to begin playback of the program. The system will
now play your complete program
9. After completing the program the device will automatically stop, the program
remains in the devices memory
10. To restart the program press the MEMORY/CLOCK button and then the PLAY/
PAUSE button
To cancel program playback press the BAND button in program mode.
Note: You can use the repeat mode in combination with the program mode to
continuously repeat your program. To start repeat playback, press the PLAY
MODE button twice while your program is playing. The REPEAT indicator will
show in the display.
MP3/WMA CD Playback
1. Press the function button and select the "CD" function.
2. Press the OPEN/CLOSE button on the remote control or on the front panel to
open the CD door.
3. Insert the CD with the label side outwards.
4. Press the OPEN/CLOSE button to close the CD door.
5. "READING" will flash in the display while the player reads the disc. The system
reads all directories and files. Because MP3/WMA CDs contain much more
information then normal discs, reading can take a bit longer. After reading, the
display will show the total amount of directories and tracks. The MP3 and WMA
logo's indicate the format of the files on the CD.
6. Press the PLAY/PAUSE button to begin playback.
7. Playback will continue until the end of the disc is reached. To stop playback
halfway, press the BAND button.
8